Currently the spreadsheet has only an uncontrolled emission rate. An EPA technical bulletin issued in November, 1999 contains information indicating that low NOx burners reduce the NOx emissions by …
TABLE II - OFF-ROAD ENGINE EMISSION RATES & COMPARISON OF UNCONTROLLED TO TIERED RATES AND TIERED TO TIERED RATES. Uncontrolled (g/bhp-hr) Tier 1 (g/bhp-hr) Tier 2 …
To convert from lb/ton to kg/Mg, multiply by 0.5. Factors represent uncontrolled emissions unless noted. SCC = Source Classification Code. ND = no data. NA = not applicable. l Reference 34. EMISSION …
uncontrolled - any pollution control devices on welding equipment at a facility will need to be added into the calculation on the ATEI reporting form. To use the tool, simply copy/paste the set of emission …
Feb 22, 2022 · Maximum Uncontrolled Emissions are the emissions at maximum capacity and prior to (in the absence of) pollution control, emission-reducing process equipment, or any other emission …
Uncontrolled Emission Factor. (lb/SCC Units) Emission Factor Source (e.g. AP-42, Stack Test, Mass Balance) Capture Efficiency (%) Control Efficiency. Hourly Emissions. Annual Emissions.
Permit Trigger: Instructions: Fill in your information into the teal-colored boxes and refer to the yellow highlighted boxes for your reportable calculated emissions. If values appear as gray and/or crossed …
Feb 1, 2007 · Completely fill out the following INPUTS pages with all requested facility specific information. INPUTS . Page 1. Include all information for each emission source and . Name of …
In the middle column under box 3e, report the maximum uncontrolled and unrestricted emissions in tons per year without including limitations based on control efficiency, rules, or proposed limits.
Instructions: Enter emission source / facility data on the "INPUT" tab/screen. The air emission results and summary of input data are viewed / printed on the "OUTPUT" tab/screen. The different tabs are …